Description
- MPM5 Port
- Using 2 pieces of SRAM (16K bits) chips, 16384 x 1 bit x 2 pieces (total 4 KB).
- Typical positions are #3, #4 and #5 in the ND-500/2 crate.
- ND-100 access through the port in slot #3
- ND-500 data access through the port in slot #4
- ND-500 instruction access through the port in slot #5
- Two ECOs (E and F) were accidentally performed on these cards (corrected by ECO G). These cards will be discontinued and will no longer be updated.
- Print: A ECO: G -- discontinued
- Print: A ECO: H
- Print: D ECO: G -- discontinued
- Print: D ECO: H
- PCB size 405 x 280 mm, 4 layers
- Release date xx. xxx. xxxx
Chipset
LEDs
- LD1 (red) - Port in test or not available
- LD2 (yellow) - Request to port from a driver
- LD3 (yellow) - Address is OK and master request is sent to the controller
- Digit 18 - Interleave port number
- Digit 17 - Not used
- Digit 16 - BASE - LSD
- Digit 15 - BASE
- Digit 14 - BASE
- Digit 13 - BASE - MSD - Start address in 128 KB units
- Digit 12 - UPPER LIMIT - LSD
- Digit 11 - UPPER LIMIT
- Digit 10 - UPPER LIMIT
- Digit 9 - UPPER LIMIT
- Digit 8 - UPPER LIMIT - MSD - Upper limit in 128 KB units
- Digit 7 - Not used
- Digit 6 - LOWER LIMIT - LSD
- Digit 5 - LOWER LIMIT
- Digit 4 - LOWER LIMIT
- Digit 3 - LOWER LIMIT
- Digit 2 - LOWER LIMIT - MSD - Lower limit in 128 KB units
- Digit 1 - Not used
Straps
Switches
Connectors
- (A) Standard ND-MFB
- (B) Standard ND-MFB
- (C) Standard ND-MFB
- (D) Standard ND-MFB
|
Component side, PCB version A, with termination, ECO G
Solder side, PCB version A, with termination, ECO G
Component side, PCB version A, with termination, ECO H
Solder side, PCB version A, with termination, ECO H
Component side, PCB version A, without termination, ECO G
Solder side, PCB version A, without termination, ECO G
Component side, PCB version A, without termination, ECO H
Solder side, PCB version A, without termination, ECO H
Component side, PCB version D, with termination, ECO G
Solder side, PCB version D, with termination, ECO G
Component side, PCB version D, with termination, ECO H
Solder side, PCB version D, with termination, ECO H
Component side, PCB version D, without termination, ECO G
Solder side, PCB version D, without termination, ECO G
Component side, PCB version D, without termination, ECO H
Solder side, PCB version D, without termination, ECO H
|