Description
- Asynchronous modem buffer.
- The card without components are used as a dummy card. It is inserted in the IO crate (in the place where an IO-card is removed), to not break the interrupt lines.
- Print: I ECO: 7
- Print: III ECO: 3
- Print: IV ECO: _
- Print: V ECO: _
- Print: F ECO: 2
- PCB size 156 x 149 mm, 2 layers
- Release date xx. xxx. xxxx
Chipset
LEDs
Straps
Switches
- Configuration (position B1), binary value (missing entries are illegal)
| SW4 | SW3 | SW2 | SW1 |
17B | ON | ON | ON | ON |
- Configuration (position B13), binary value (missing entries are illegal)
| SW4 | SW3 | SW2 | SW1 |
17B | ON | ON | ON | ON |
- Configuration (position C1), binary value (missing entries are illegal)
| SW8 | SW6 | SW5 | SW4 | SW3 | SW2 | SW1 |
177B | ON | ON | ON | ON | ON | ON | ON |
Connectors
|
Component side, PCB version I
Solder side, PCB version I
Component side, PCB version III
Solder side, PCB version III
Component side, PCB version III, dummy card
Solder side, PCB version III, dummy card
Component side, PCB version IV
Solder side, PCB version IV
Component side, PCB version V
Solder side, PCB version V
Component side, PCB version F
Solder side, PCB version F
|